Stand in front of the headlight assembly, with the hood open, notice the two black locking tabs sticking up behind the headlight assembly, remove the two tabs by pulling on them straight up, this will release the headlight assembly and allow you to wiggle the assembly out to expose the bulb and connections.
Remove the retaining screws from the headlight assembly. Remove the wiring harness from the back of the headlight. The headlight will come out. Reverse the process to install the new headlight.
To remove the headlight unit from Vauxhall Vectra SRI 1999, first remove the cover and disconnect the wires by pulling outwards. Push each side of the pin outwards until it releases. Then remove the headlight unit.
What do you mean by headlight cover?What are you trying to do?JW
There is one bolt on the top and three nuts behind the headlight that have to be removed.
Remove the headlight, reach in, and twist.
Remove the fuel tank or remove the bed, your choice.
Open the hood, stand in front of the effected headlight, notice the two tabs sticking up behind the radiator support in back of the headlight assembly. These tabs are locks that hold the headlight assembly in place. Lift the tabs up and remove them. Now you can wiggle the headlight assembly out the front and remove the bulb. Reverse for assembly.
It is built into the headlight switch.
Headlight cover? The headlight can be removed by first removing the bumper cover. THen all the bolt that attach the headlight to the vehicle will be exposed. The "cover" is glued to the headlight housing.
On a 1999 C5 corvette manually put the flip up headlight in the up position, remove the plastic headlight trim around the headlight with three screws... put your bare arm under the raised headlight and remove the turn signal bulb with a careful twist.
Inside the headlight switch.
There are bolts surrounding the headlamp. remove these and the wires.