You have to have a very slim tool, I happened to have a very slim and narrow spatula, slide it down the front of the headrest support until you hit the mechanism inside and then pull it off while pushing down on the mechanism.
The 1987 Trans Am didn't have a 455
The Trans Am GTA was not intruduced until 1987.
no there is no inertia switch. gmjim
Hi, I have an 1988 Coupe Deville with same issue. Did you ever find out how?
all camaros and firebirds, are 5lug x 4.75
Nothing, the GTA didn't come out until 1987.
The 1987 Pontiac Trans Am shifter knob is held in place with a retaining clip below the shifter knob. Push the retaining clip together and the shifter knob will raise off.
Bad fans or the sensors that tell the fan when to kick on are bad.
Under the cap, inside the distributor, it is easy to change with the distributor off the car, a pain to get to with it on the car.
yes, well i have a 84 and im thinking its exactly the same, its jus the four bolts on the plate. that's it..simple as that hten there will be two to four more in by the radio which u will see, that will need to be removed to remove the deck..if nemore ?
After you have released the tension from the belt, remove the 2 obvious bolts that hold it to the engine block.
NO, Only engineering "mules" for there own tests. The first production 350 third gens were sold in 1987.