The Weather Channel Weekend View - 2006 How to Remove Ice from Your Car Windshield was released on: USA: 5 January 2014
to remove the fuel pump you will have to remove the fuel tank as it is located inside the fuel tank
its inside the windshield washer fluid tank, you have to remove it to access the pump
its inside the fule tank drive safe
1. Remove the inside rear view mirror. 2. Remove the cowl top vent panel. 3. Remove the necessary interior trim to access the inside toop and side edges of the windshield glass. 4. Pry up the end of the windshield outside moulding. Twist and pull to remove. 5. Cut the urethane sealant. 6. Insert an inflatable pump bag at the top of the windshield glass. Gently push the windshield glass outward from the inside of the vehicle to insure the urethane sealant has been broken. 7. Use a razor blade knife to cut any remaining urethane that is holding the windshield glass and remove the glass. 8. Clean off any sealant with alcohol free solvent if the windshield is to be resused.
Remove the mirror and use a heat gun to remove the button. Caution: There is always the possibility that the windshield will crack.
There is a small compartment under the wripper which you have to remove the wripper before opening it. Inside you will see an adapter which can connect to your heated windshield.
To remove the windshield from a Chevy Celebrity: To remove the windshield you will need a special knife to cut thru the "glue' that holds the windshield in place. Remove the weather strip that is around the outside of the window. Take off the windshield wiper arms. Remove the screws and take off the air inlet panel at the base of the windshield. Slide the knife between the glass and the metal frame and cut the "glue" loose around the perimeter of the windshield. Once the "glue" is cut free the windshield should easily be removed. If the windshield is not already broken you stand a good chance of breaking it trying to remove it. I have seen the special knife available for sale at Harbor Freight, I would think there are other stores which also carry it.
there bonded windscreens and you need specialist tools to remove and fit, cheaper to get the experts to fit it than pay out for all the tools
Remove the wiring harness from the wiper motor. Remove the windshield wiper arm from the wiper motor. Remove the wiper motor retaining screws. Reverse the process to install the new wiper motor.
From the inside, cut out the rubber windshield rubber with a box knife. Take care not to cut too deep, as you could snag on the headliner. Gently tap the windshield at each corner to free it, then remove. Best to have a friend handy, but easily done by yourself.