Want this question answered?
Remove the ignition retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition.
I need to remove the front seat to my Vauxhall combo van to replace the seat belt clip, the is Van on an N Plate it's a Vauxhall COMBO 1.7. Many Thanks
1 .Remove the screws from the housing which covers the steering column and ignition barrel etc, both top and bottom, remove covers 2. on the top centre of the steering column is a screw which holds on the controls for your indicators etc, remove this. 3. before lifting off the controls you will have to unplug the connecting wires on the left hand side as this will disable the alarm, its a simple plug just pop it out. 4. Covering the ignition barrel is a plastic cover, remover screw and remove the cover. 5. on top of the now exposed ignition barrel is a small hole place a small screw driver into this and press firmly (there is a button inside) keeping the key in the ignition after a bit of jiggling the barrel will come out.
You will need to remove the ignition switch retaining ring in your 2002 Chevy Astro Van. Slide the ignition switch out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.
To remove the "key" ignition, insert a small screwdrived in the hole directly below the ignition in the column. You will need to have the key in the ON position otherwise the ignition will not come out of the column.
You can remove the 2000 Chevrolet Astro Van the ignition switch cylinder by removing the retaining ring. The retaining ring will need to be turned to the left. The ignition switch cylinder will slide out.
Remove the retaining ring, from the top of your 1997 Ford Astro ignition lock cylinder. Remove the wiring harness from the back of the ignition lock cylinder.
How do you change alyernator on vauxhall combo van 2007.
how do you reset the service indicator on a 07 vauxhall combo van
If you need to remove your ignition switch, you should consult your owners manual. Check for a guide on how to remove and replace and follow the instructions.
oDon't look for it here n
One to repair an ignition switch on your Astro Van is buy a replacement steering column from a local salvage yard including the ignition key, and replace the whole steering column. RC Houston, TX