Want this question answered?
Remove the retaining ring at the top of your 1993 Chevrolet K 2500 ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
you have to replace the whole steering column
Replace ignition switch for 1993 buick century?
Begin by removing the retaining ring at the top of your 1993 Nissan Quest ignition switch. Slide the ignition barrel out. Remove the wiring harness from the end of the ignition barrel. Reverse the process to install your new ignition switch.
hi i need to remove ignition from an audio 1993 how do i do it
youve got to remove the steering wheel, take the locking mecanism off, then the mecanism for the signal lights off....whitch should only have a few screws.....then where the ignition switch is.....you should see a screw that looks like it goes through the switch..remove that then give the ignition switch a tug or two and it should come out
you will need security type star screw drivers , remove three screws from bottom of column cover,remove three screws from ignition switch.Replace with new switch.
The 1993 Ford Bronco power door lock relay switch can be found behind the dashboard on the drivers side of the passenger compartment. The relay switch should be labeled as such.
it's located inside the steering column. Remove 3 screws on the lower steering column cover. Its the white plastic on the oposite side of the ignition.
first time? i understand. there's a push botton on top of the ignition-key-hole, you'll need to press and hold it down in order to remove the key.
you need to push in the hole with 1/8 inch screw driver under the steering column, below your ignition switch. there is a release button in there and it just pulls out once you have that release button pushed it's actually quite easy..
It would be under the dash on the passenger side, its kinda tucked under. Or remove the passenger side kick panel and it should be in plain sight.