Want this question answered?
Yes it does. It is inside the transmission pan. You have to remove the pan to access.
If you remove the transmission pan, it is the part bolted to the inside of the transmission.If you remove the transmission pan, it is the part bolted to the inside of the transmission.
According to professionals, you need to change at least 2.6 quarts of transmission fluid in a 1991 Toyota Land Cruiser. You will need a 3/8 socket wrench to remove the transmission fluid plug.
The only tools need to remove the inside door panel on a Toyota Sequoia is a screwdriver. There are various crews that need to be taken out to remove the door panel. After the screws are out, the door panel comes off very easily.
The seats bolt to the floor. The bolts need to be removed, then the bolt holes will still be visible through the carpet.
On a 1994 KZJ78 or KZJ70 the ECU is behind the glove box. Remove the glove box inner and look up.
I had an hj61 cruiser. the aerial could be accessed from a cutout in the panel under the bonnet. Try this. It was obvious once i looked for it.
you have to remove the intake and it is located inside the engine block,you can see it once you remove the intake........
how do i remove the door panel off of my 1991 Toyota land cruiser
You need to remove the inside door panel, then remove the bolts that secure the mirror. It is very simple procedure.
from inside trunk remove trunk liner to expose back side of lights locate screws and remove install is the reverse
Remove the wheel, the bleeder screws are on the inside on top of the caliper.