It depends on the model year and size of engine cover based on the engine underneath. For 1996 and newer, you generally have to remove the passenger seat in order to get the cover out of the way.
The 2001 Chevy Express Van crankshaft sensor will be on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft sensor.
how do i remove an antenna to a 1998 chevy express 1500 van
how do you remove the pince bolt cover of a 2005 Chevy express van
Chevy Tahoe remove front and rear speaker
Depends what year, If you have a 2003 and up its very easy you just take off the interior cover for the engine and they're right there. 2002 and lower you have to remove the front wheel on each side and access them through there.
Yes it would be easer to get at it with the dog house removed.
Remove the decorative cover from your 2006 Chevy Express stereo. Remove the stereo retaining screws. The stereo will slide out. Remove the wiring harness and the antenna cable from the back of the stereo.
Where does the vacuum line lead to from the top of an 2002 Chevy express 1500 van with 5 liter engine
It is located in the rear of the engine. You must remove the engine cover inside the cabin. The sensor is in the middle, back of the engine. Assuming the engine is in front of you. It requires a deep socket size 1-1/16 to remove sensor.
i do not know...
Does anyone know the proper way to remove the clutching fan on a 2000 Chevy express van 3500 5.7 ltr?
Follow the upper radiator hose from the radiator to the engine. Where the hose is attached at the engine is the thermostat housing. Drain some coolant from the radiator thru the petcock, remove upper radiator hose from thermostat housing, remove thermostat housing then remove the thermostat. On the Express van you will probably need to remove the air filter assembly to gain room to work.