Want this question answered?
Relieve the fuel pressure. Unplug the injector rail wire harness. Remove the two fuel rail mounting bolts and the small screw and clip that secure the lines to the exhaust camshaft housing. Pull strait out while wiggling the fuel rail. At the top of the injector,remove the clip and unplug the electric. Remove the clip on the bottom of the rail that holds the injector in. Pull the injector strait out. Check that the O-rings are still attached to the bottom of the injector and at the top. If not, CAREFULLY.. remove them from the holes that they were mounted in.
Both the 3.0 liter and 3.8 liter V6 engines offered in a 1999 Ford Windstar have ( 6 engine cylinders )
where is located the fuel injector presssure regulator on a 1999 ford explorer 5.0 liter engine?
It has 6 injector 1 Injector per cylinder
On a 2002 Ford Windstar , 3.8 liter V6 engine : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
On a 1998 Ford Windstar , 3.8 ( and 3.0 ) liter V6 engine : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
On a Ford Windstar , 3.8 liter V6 engine ( and the 3.0 ) firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
In a 1998 Ford Windstar : There were 2 engine sizes offered from the factory : A 3.0 liter V6 engine and the 3.8 liter V6 engine
It could have either the 3.0 liter " Vulcan " V6 engine or the optional 3.8 liter V6 engine in the 2000 Ford Windstar LX
96 windstar 3.8 oil pressure switch is located under power steering pump. Remove serpentine belt and alternator. Remove PS pump pulley with special puller to get access to PS pump bolts. Drain PS pump and remove PS hoses. Remove PS pump.
The 3.8 liter V6 engine in a 2003 Ford Windstar has a timing CHAIN
The 1998 Ford Windstar Owner Guide shows ( 4.5 quarts with engine oil filter change ) for the 3.0 liter and 3.8 liter V6 engines