the easiest way i have found is to remove them trough the trunk. If it was a luxury you have to remove the boxes that go around it. the hard way is to remove the back dash which takes a while
Answer 2I couldn't get at them that way but I ended up taking 2 screws out of the bottom of the back set cushion. The pulled it out. Took out the 2 screws holding the set belts on (which hold the back cushion on). Pulling that out and last pulling that gray shell thing off. There are 2 black things holding it on that i couldn't get off so i broke them off. Then your there. Real pain in the ass but doesn't take more then a hour.-Mitch
I have a '95 and I just went in the trunk and used pliers to twist the screws upwards and took the speakers out that way. I used #10 screws, lock-washers and nuts to secure the new speakers. The "official" way is to take out the back seat(!) Who designs these things anyway??
4x6 hard to replace!!!
remove cover, unscrew, disconnect
a 1991 buick skylark has 4" speakers in the dash and 6x9's in back
how do you replace the alternator in a 97buick skylark
I have a 1990 Buick Skylark and I need to remove the oil pan. How do you do it ? Help!! Just remove the spash shields in the way of the pan then remove the bolts from the pan and replace the gasket. You can find Buick manuals from Chiltons on Amazon for these cars. They're cheap nowadays.
You need to do a lot if it is like my 1995. You need to remove the back seat remove the back of the back seat remove the screws holding the rear deck.. where the speakers are. then remove the screwss... what a pain.
How do you replace the water pump and where is it located on a 1996 Buick Skylark V6
you replace it by...hold on
how do you replace a ignitionswitch tumbler 1991 buick skylark
they used 4"x10"
can i do this at home
I think you just hold the lid down and lift it out. They're fairly easy to remove.