answersLogoWhite

0


Best Answer

I have just removed a pedal box with the assistance of another 50+ year-old Mechanic. It was character building to say the least! Some of the "advice" we got on the net was misleading . The steering column on this vehicle was the adjustable type and does not have to be removed. The easiest way round the pedal clip problem was solved by using a small crow (wrecker) bar and pinging the clip out of the pedal, then crushing the clip into submission and remove it from the push rod. The clip is well built (the only part in the whole assy. that is!). With the pedal removed it takes a little bit of wriggling to get the box out. The welding job is straight forward and will probably out live the car. I do not know if the clip is available from non-VAG sources.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove pedal box on a 96 vw polo?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the location of the fuse box in a 1996 Nissan Altima?

The fuse box for a 96 Altima is located under the dashboard by the brake pedal.


Whe is the fuse box the dodge caravan 96?

There are fuses in two locations. Some are in the box next to the battery, others are under the dash, to the side of the parking brake pedal.


Where is the heater resistor on Geo Tracker?

no year? wow top of heater box. on 96 , remove glove box door.


How do you get glove box out of 1996 dodge Dakota?

I believe on the '96's you open the glove box and remove the screws on the top edge


How do you remove and refit drivers side electric window regulator on a 96 polo?

Begin by removing the inside door panel. Remove the wiring harness from the electric window regulator. Remove the window regulator retaining screws.


How do you disconnect the abs in a 96 Oldsmobile bravada?

Remove the abs fuse under the hood in the fuse box


Where is the fuse box on a 96 crown vic?

There are 2 fuse box's. The small one is inside the car up around the brake pedal, the 2nd is is under the hood on the passenger side. You need the car manual to tell you what is what.


Where is the obd2 port on a golf?

On the jetta not sure bout the golf It depends on the year,2004- present you will find under the glove box 96-03 should be directly above the brake pedal,


How do you change a manual transmission to a automatic in a 96 Nissan sentra?

A lot more work than it is worth, you will need to change the brake pedal, Remove the clutch pedal, master cylinder and slave, trans mounts may be different, center console, flexplate and torque converter


Where is the blower motor resistor in a 96 VW Polo?

remove carpet trim below the glovebox. Find item with one four wire connector in and 1 wire connector out. Remove by pressing levers on the sides and pulling, to reveal resistor unit.


Where is the ECU located on a 1995 Nissan Altima?

The ECU is located to the right of the gas pedal. If you look to the right of the gas pedal you should see two pieces of detachable plastic, a small piece connected to a larger piece. simply pop off the smaller piece (closest to firewall) by removing the grommet (black with a Phillips head) and unlatching it from its hinges. The ECU is located behind this piece in a slanted position. The ECU is a finished silver box with a white decal. If your trying to remove it you need to remove the glove box, center console box, and center console along with part of the dash. i just removed mine and replaced my ECU in my 96 Nissan altima GXE 2.4L this gives enough room to get your hand behind and remove the twe screws holding it in.


Where is the transmission fluid located at on a 96 Cadillac deville?

It is under the intake tube from the air cleaner. You have to remove the air box to get to it. GM had a great idea with this placement .....