Switch is held in with two 5/16" nuts on the backside; if you have delay wipers, you'll have to take out the screws that hold the wiper delay unit from the bottom of the dash to get to the switch nuts.
If you are referring to the inertia switch, it is in the trunk.
The repair section on autozone.com explains how to change the light switch.
An antenna switch is a switch which allows a person to select which antenna to use with a transmitter, receiver or transceiver.
you will have to remove its cover . (pice of the left side of the dashboard.
Just remove one screw inside car, under the dashboard near the ignifion switch area.
Reach under the dash and you will feel a button that you push in on the switch itself. Then you can just pull it out from behind.
It is located under the lower dashboard. Remove the lower dashboard and then remove the two nuts holding the steering column up. Get rid of the plastic shell around the switch area. It is an inverted star socket.
There is a lock ring on the inside of the dash where the switch connects. You need to remove this lock ring to remove the switch from the dash.
Fuse, loose connection, or the light switch. how do you remove the dashboard on a 94 mercury grand marque?
Pull out type? There is a silver button on the side of the switch (behind dash) Push button and pull switch all the way out Then remove bezel and remove switch from behind dash Ford suggests replacing plug also
where is backup switch located on a 63 thunderbird
To install an automatic antenna tuner you will have to call the dealership to get the part. You will have to turn the power switch off, remove the screws on the top case, turn the backup switch off and remove the backup battery. Turn the power switches back on and screw the top case back on.