Reach under the dash and you will feel a button that you push in on the switch itself. Then you can just pull it out from behind.
The 1978 thunderbird had a 460 as one of its optional engines so yes it can fit
High-powered explosives.
after electrcally disconnecting the switch there should be a small button on the bottom of the switch body that will release the switch shaft. then just pull it out and do the inverse to put the new one in.
Mercron transmission fluid is used in a 1978 Ford Thunderbird. Type F fluid can also be used but should not be mixed.
== == remove the three retaining ring screws wiggle out the old headlight ,reinstall the new head light put the retaning ring back on and reinstall the three screws.
fuse location 1978 fodr tbird
there is the headlight switch in the dash witch turns them on and the relay on the floor by the e-brake that controls the high-low beams. that's about it
104 mph.
Inside the driver's side door on the forward part of the frame (above the door hinges, directly to the left of the headlight switch). There is a metal plate with the paint codes stamped on it.
You will need to remove the retaining ring at the top of your 1978 Chevrolet Blazer ignition switch. Slide the ignition barrel out and remove the wiring harness. Reverse the process to install the new ignition switch.
Hr78-15 > p225 75r15 hr70-15 > p225 70r15
Yes, the headlights should be completely identical.