Want this question answered?
To replace an Isuza Rodeo steering the steering column should first be removed. Pop off the front steering wheel cover to see the steering wheel nut. Loosen the nut and remove the wheel.
Most power steering fluid is the same, only different brand names. Call your local Isuzu dealer if you are not sure.
First you will need to remove the steering column cover which will expose the ignition switch. Remove the connector and the three bolts holding it on. Pull the switch out and replace.
sounds like a bad power stearing pump
If you are refering to the A/C compressor, it is under the power steering pump, on the right side of the engine, while facing it.
The guy at the local transmission repair shop told me it sits on top of the engine control module. You have to remove the console to get to it.
Did you check the drive belt to see if it broke?
how do you remove transmission in 1999 rodeo
Mine is located on the steering wheel . press the lower portion of the wheel . i have the 1997 holden rodeo .
3; alternator, power steering, air conditioner... There is the timing belt also. It is behind some covers at the front of the engine.
I was told to use a Dexron III automatic transmission fluid. I know it sounds wierd, but that's what they told me at AutoZone.
hoew do you remove a c v axle from a 97 isuzu rodeo front right