Remove door trim screws, one in handle one next to side mirror. Remove power window door lock trim, the metal piece is attached to the plastic part. Lift whole door trim up at the rear and down at the front to slide out from door opener handle. Remove the plastic sheeting and any insulation. remove the glass from the lifter arm. Remove wiring.Drill out the 3 rivets that hold the motor, pull out and replace. 1/4 20 bolts and nuts work if you don't have rivets.
First, remove the door panel. Depending on the location of your particular vehicle there will be bolts holding the window motor in place, or rivets that must be drilled out to remove the motor. Before you do that you must unbolt the window brackets from the bottom of the window and remove the glass. If you have any questions you may me @ melissasretard@msn.com
First, remove the door panel. Depending on the location of your particular vehicle there will be bolts holding the window motor in place, or rivets that must be drilled out to remove the motor. Before you do that you must unbolt the window brackets from the bottom of the window and remove the glass. If you have any questions you may me @ melissasretard@msn.com
If an automatic window will fail to lower on a 1991 Honda Accord than the power winder motor or relay can be the problem. The easiest place to check is the relay. If the relay is fine than the motor is failing.
check on eBay for a power window motor. from what i have heard its only 1991 -1994 mercery capri only
Take the door panel off,you will need to remove 3 bolts for the window motor and then 3bolts(maybe4) that hold the regulator to the window
It's the switch because the motor is getting power to go up but not down.
It probably needs a new motor.
It is in the door. I suggest you take it to a trim shop to have it replaced.
The 1991 Toyota Corolla power window relay switch is located inside of the drivers side door. You will need to remove the drivers side door panel in order to access the relay switch.
remove plastic moulding around door handle and door lock. unscrew door handle and unsnap plastic anchors around lower portion of door unscrew door panel from door. lift up on panel and remove. remove plastic. unscrew motor from door , let window down and remove two screws holding window. remove motor and metal bar replace and reverse process. 1991 Nissan maxima
Behind the power steering pump on the passenger side.The pump will have to be removed in order to remove the blower motor.
On any power window system: 1- check the fuses 2- check the switches 3- check the motor, go up/down and listen for an attempt for the motor to move 4- check the window relay