0
look on top of the radio there is a tray. grab the top of the tray and pull out there are clips that hold it together then just let it hang from the wires you will see the radio on brackets then just remove the 4 bolts from the bracket and pull the radio out dont forget to remove the conncetions on the back. once you remove the radio there are 4 screws on each side of the radio that is holding the radio to the bracket. remove those to remove radio from bracket. dont lose those screws your going to need them to install on new radio. any more questions e-mail emezahth@gmail.com
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
2003 CTS remove radio?
1. Open the ash tray and remove the felt lined insert, behind it is a bolt you need to remove. 2. With that bolt removed you can pop out the ash tray/climate control unit, and you will be able to see the two bottom bolts for the radio. 3. Above the radio you will need to pop out the ac vent, it isn't screwed in so you just have to pull on it and it will pop out. With the vent removed you will see the top two bolts for the radio. 4. Remove the 4 bolts and the radio will slide out.
How do you Remove radio 98 ford transit?
remove the 2 plastic side panels. then you will see 4 small holes, insert a coathanger or other small object in to each hole and push away from the radio. then pull out the radio
How do you take out a radio from a 2003 Nissan Micra?
As a previous techy for Nissan i have done this many times. Ensure you have a radio code beforehand though, once you unplug the set, you will need to input a new one when you put it back in. The following set of instructions is for the latest shape micra, the "bug". 1. Open both front doors 2. Remove the door seals 3. Remove the dash top by pulling upwards 4. Remove the bracket from under the dash top bolding the radio in (3x10mm bolts). make sure you don't drop these as they are quite awkward. You don't take the radio out as a single unit, you take the radio, trip computer and vents out as one unit. 5. Remove the plasstic caps inside the little compartment at the top, and remove the two screws. 6. Remove the two screws UNDEREATH the section of trim you are going to remove, just above the heater controls. 7. Pull the radio along with everything else out as one. 8. Remove all connectors ensuring you remember where they go. 9. Put everything you have removed on a carpeted table to stop scratches, and gently remove the vents by pressing the clips back that hold them in place. 10. You can now access 4 screws that hold the radio into the frame, remove them as well as loosening as many screws as you can see that hold the together, i remember i used to loosen a certain 4. 11. With the frame loosened it is now possibe to remove the radio from the frame, otherwise its too tight. Hope that helps,.
How do I remove faceplate and radio on 1990 Buick LeSabre?
you have to remove the wood grain trim peice by just pulling then remove the air vents there are about 7 screws under the wood trim and then another 1 under each vent then open the glove box to get to 2 more screws then remove it once you remove all the screws the dash should lift right out
How do you remove a jammed CD from car radio in a ford focus?
I removed 2 cds from my 2005. Remove the cover that surrounds the radio. The lighter and htr./ac. will come with it. Just be carefull and use a small screwdriver around the edges to remove it. Romove the 4 bolts that hold radio in place. There are 4 torqs screws that hold the faceplate in place. When that came off mine the 2 cds were sitting in a cavity on top of CD player they should fall out.
How do you remove the door panel on 2003 Toyota 4 runner?
To remove the door panel on a 2003 Toyota 4 Runner, locate the screws holding the panel to the door. Unscrew these and lift the panel up and away from the door.
When do you change the timing chain in a 2003 Toyota 4 runner?
when do you change timing chain on 2003 Toyota 4-runner?
How do i remove a Windshield washer pump on a Toyota 4-runner?
How do I remove a windshield washer pump from a toyota 4-runner 1988?
PRICE FOR TOYOTA 4 RUNNER 2003 265-65-R17 (4 TIRES)?
“PRICE FOR TOYOTA 4 RUNNER 2003 265-65-R17 (4 TIRES)”
Can you recode the radio in a 1995 Toyota 4 runner if you don't know the old code?
In order to recode the radio in your?æ1995 Toyota 4 Runner you will need the old radio code. You can obtain this code by contacting the Toyota company.
Does a 2003 Toyota 4-Runner 4.0 liter have a timing belt or chain?
The 4.0 liter V6 engine in a 2003 Toyota 4 Runner has a timing CHAIN
1992 Toyota 4-runner clock have a fuse?
The 1992 Toyota 4-Runner does not have a separate fuse for the clock. There are, however, two fuses that control the radio and clock. At slots 18 and 19 in the fuse box, there is a mirror/radio fuse and a radio fuse.
How do you replace a 2000 Toyota 4 runner driver's side mirror?
how to remove a passenger side mirror on a 2000 toyota 4 runner
2003 CTS remove radio?
1. Open the ash tray and remove the felt lined insert, behind it is a bolt you need to remove. 2. With that bolt removed you can pop out the ash tray/climate control unit, and you will be able to see the two bottom bolts for the radio. 3. Above the radio you will need to pop out the ac vent, it isn't screwed in so you just have to pull on it and it will pop out. With the vent removed you will see the top two bolts for the radio. 4. Remove the 4 bolts and the radio will slide out.
Which fuse is for key less entry for 2003 Toyota 4-Runner?
I can not unlock the doors to my 2003 Toyota 4-Runner with my fab. I put a new battery in my fab. What is wrong? Do I need to replace a fuse in my car? Thanks.
Where is ecu located in 1997 4 runner?
In the dash, behind roughly the center area where the radio is.
Where can I find a Serpentine Belt Diagram for a 2003 Toyota 4 Runner?
A 2003 Toyota 4 Runner serpentine belt diagram can be found in the maintenance manual. A person can also ask for a print off from an auto part store.
