I have NEVER read a manual or asked anyone how to replace the brakes on any vehcile in the over 20 years of working on vehicles. If you have to get your brakes worked on, and you have no knowledge of vehicle brakes, have someone you know, who knows HOW TO DO IT RIGHT, show you. or Take it to a shop. The most prominent weapon in use in America today is the Automobile. Playing with it, is like playing with a loaded 357 magnum with the hammer cocked.
Remove the wheels, pry the drums off.
Remove the wheels from your 1995 Toyota Camry. Remove the brake pads by removing the brake pad Springs. Tap on the brake drum with a hammer or mallet. Slide the brake drums off. Reverse the process to install the new brake drums and shoes.
If you are inexperienced, you should not be messing around with the brake drums.
brake drums should pull off if not rusted on.
Remove the drums and take them to an auto parts store that has a brake drum lathe.
experience and a big hammer
You have to loose nuts and lift your car up. Then remove a wheel. There are two ways to remove brake drums. First using a hammer. Knocking the drum with a hammer in the direction opposite from the car. And second more efficient is to find two screws which fit threades in removing drum holes (two holes in a drum with a thread in it).
very carefully :)
No, the drums can be cleaned with brake cleaner.No, the drums can be cleaned with brake cleaner.
first you have to take the wheels off of the van,and then you have to take the tension off of the brake shoes. Next you will be able to remove the rear brake drums off of the vehicle.You may have to tap them with a hammer to break them free.
Brake drums are not attached with fasteners, they just pull off once wheel is out of the way.
remove rear brake drums