experience and a big hammer
remove rear brake drums
Brake drums are not attached with fasteners, they just pull off once wheel is out of the way.
Remove the tire and wheel from your 1988 Ford Ranger pickup truck. Remove the brake pads. When the brake drum is not loose you can tap on it with a hammer or mallet. Once the brake drum is loose it will slide off.
If you are inexperienced, you should not be messing around with the brake drums.
brake drums should pull off if not rusted on.
Remove the wheels, pry the drums off.
On a 1991 Ford Ranger : Either 9 inch or 10 inch brake drums
Remove the drums and take them to an auto parts store that has a brake drum lathe.
Remove the wheels from your 1995 Toyota Camry. Remove the brake pads by removing the brake pad Springs. Tap on the brake drum with a hammer or mallet. Slide the brake drums off. Reverse the process to install the new brake drums and shoes.
Friction.
very carefully :)
you have to remove both rear wheels ,remove brake drums, remove brake shoes,loosen brake hose or metal line and remove, remove bolts holding wheel cylinders to backing plate and replace, clean backing plate and hardware and reinstall all in reverse order, adjust rear brake and bleed system to remove air from lines.