Want this question answered?
It is behind the rear seat.It is behind the rear seat.
Unzip back. Remove upholstry rings on the two bottom metal rods then slide the rear one half way out to fold it up. Remove rings holding middle metal rod. Push headrest halfway down. Slide a screwdriver up the front of the headrest post to keep the release lever from closing while removing the headrest. It is located behind the front seat foam. I have a 93 Lebaron GTC Conv
behing the rear seat
It is behind the rear seat.
Yes, behind rear seat.Yes, behind rear seat.
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
How do you remove the rear seat on a 2002 diamante
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
It doesn't fold down. It is bolted in place.