pull your back seats down, there should be some screws right behind them...around 4. then you will need to pull of the little grey panel the screws came off of. afterwards, you will need to unsrew the screws underneath the speakers in the trunk, just leave your back seats down and crawl through right there. once you have done that, just pop off the back panel, and then you will need to unscrew the speakers, then pull them off, (just pull them because they have a glue that holds them in, they will not brake!), then you will need to cut off the stock adapter on the end of the wire that was attached to your speakers, then you will just attach the red and black wires to your speakers and install them. reverse the process to put your panel back on...note that you will not be able to use the grill that came with your speacker because the stock speaker grill (or cover) has little interlocking pieces that latch onto the rear dash panel.
Impala HQ .com
Front door speakers - 6.5 rear speakers - 6x9
Remove the rear speaker covers in your 1994 Chevy Cavalier. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the rear speakers.
Remove the covers to your 2000 Chevy Malibu rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new rear speakers.
The front door panels have 6 1/2" speakers and the rear speakers are 6x9"
The 1963 Chevy Impala dashboard speakers measure 4.5 inches in diameter. The rear speakers measure four inches by six inches.
5x8 in the doors and 6x9 in the rear dash
Front Door's Speakers: 6-3/4"; Rear Deck's Speakers: 6" X 9".....
First, you must move your backseat and remove it from the vehicle, then you use the correct tool to correctly remove the rear speakers. It is very time consuming.
Remove the covers from your 1997 Chevrolet rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
Reverse the process to install the new speakers. You will need to remove the speaker covers from your 1995 Chevrolet rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers.
Reverse the process to install the newYou will need to remove the covers from your 2003 Chevy Cavalier rear speakers. The covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers.