Remove caliper and pads. If it can not be hauled off, then push in the black slotted plug on the rotor. Move rotor until that hole is at six o'clock. Using a flashlight adjust until it is at "emergency brake adjuster." This is a golden bolt that runs parallel with the car. On this bolt are teeth. Using a flat-head screw driver adjust it. This is awkward, but once you've adjusted it, the rotor can be edged off. It took a lot more effort than I expected.
Tap on the rotors with a hammer, after removing the tire and wheel and the brake assembly. The rotors will come loose. Slide the rotors off and reverse the process.
Remove the cotter pin/nut in center & they pull straight off.
On most camries you need to remove the wheels, then brake pads, and the calipers. Most camries do not use any screws to hold the rotors, thus when you remove the calipers you should be able to remove rotors without problems.
how do i remove the brake rotors for a 2003 Toyota tacoma v6 2wd
how to remove front rotors on 2003 Nissan fronter 4 wheel drive pick up
Your front breaking pads are needed to be repalced, you might have to replace rotors.
take off a retaining nut?
start by taking the tires off
remove rotors on 97 CamryHi, I want to get my front rotors resurfaces as there is a vibration when braking. I have changed brake pads on my car before soi am sure i i know how to remove the calipers and need some assistance and further what bolts and nuts do i need to removed to pull the rotor out.Thanks
remove wheel remove brake caliper remove locking hubs special tool required to remove axle nut
Air tools and PB Blaster.
You have to remove wheels, brakes pad holders, remove the bottom bolt holding the caliper, and loosen the top bolt as much you need in order too be able to rotate and release a rotor.