It is easy to remove or replace the two front seat of Toyota Vios 2011 or 2012. The hard thing is the back seat if you don't know how it was mounted. Actually, there are two mounting of the back seat between left and right. You can remove the back seat by starting at the right side. Put your hands at the bottom near the front side then pull it in upward direction to dismount plastic mounting. It needs full force to pull it upward then once pulled out you can do the same the other left side. You can remove also the the back side by removing first the 3 nuts at the bottom. Once the 3 nuts were remove you can remove the back side by pulling it upward direction.
it is on the back of the seat. remove the seat and remove the black cover on the middle. the pump and the filter are together.
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
The type of the rear seat of the Toyota Corolla will determine how you will remove it. For instance, for a folding seat, all that you will need to do is to lower the seat to gain access.
Remove the passengers side front seat. remove the metal engine cover after pulling carpet back, remove the long metal cover covering the spark plugs and wires.
Remove the rear seat, there should be an access cover underneath it
Remove the nuts! They are on the lower metal frame the seat
ANSWERIt is under the rear-seat on the Driver's side. Pull up on the front of the seat in it should release. Remove the seat and you will see an access panel with a wire coming out of it. There are four screws to remove this cover.
The-seat-cover-factory is asking $239.99 for a seat cover that is for a 1992-1995 Toyota Camry LE. See the-seat-cover-factory.amazonwebstore.com/
flamethrower
The battery is behind the passenger seat. To get to it you must remove the floor mat on front of the second row seats; then remove the plastic cover covering the tracks of the right side middle row seat. This will then expose a carpeted cover held down by a torx head screw. Remove the screw and cover and the battery will be exposed.
The maxi fuse is on the left side of the motorcycle under the square cover just below the seat. You dont have to remove the seat just pull that cover off (it just snaps in) and you will see a big green 30amp fuse, just remove it.
you have to remove rear seat ,under the seat there's two covers , one is for the fuel pump , the other is for the fuel gauge sending unit .Remove cover on passenger side and remove fuel gauge sending unit .