there are lots of differant kinds, what year make model?
You will first need to remove the coils and plug wires to access the spark plugs. The coils sit on top of the valve cover and are held in with small torx head screws. Then pry off the plug wires and remove the coil and wires together. Then you have access to the spark plugs.
Changing the spark plug wires in your 1999 Mercedes-Benz is quite simple. The spark plug wires simply lift off. The new spark plug wires can be pushed onto the spark plug. It is best to change one wire at a time.
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
there are no wires. each spark plug has it's own "coil on top" remove the coil by pulling straight up . then remove and replace the spark plug. That wrong ther are wires on the 3.5 and it,s not easy you need to remove the intake manafold to remove & run new wires
Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.
Disconnect the battery, and remove the spark plug wires one by one. Replace the spark plug wires in the same order, ensure the connection is firm, and connect the battery.
No. However, newer plug wires can be extremely difficult to remove without damaging them.
Remove the engine covers and carefully remove the ignition wires from the spark plugs, there are 12 of them, then remove the spark plugs with a 5/8 plug socket. Make sure the gap is correct on new plugs put a bit of anti seize on the threads then install the new plugs...
Spark Plug Wires? Remove them 1 at a time from the spark plug to the distributor or the ION pack, remove and replace the spark plug, add the new spark plug wire from the newly added spark plug to the distributor or ION pack.
To replace spark plug wires on a 3300 Oldsmobile engine, open the hood and remove the wires from the end of the engine. The number of spark plug wires most often corresponds to the number of cylinders your engine has.
Disconnect the wires to the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and spark plug cables and reconnect the wires to the battery posts.
It does not have spark plug wires. It has a coil on each plug. You unplug the electrical connector, remove the hold down nut, and lift the coil off.It does not have spark plug wires. It has a coil on each plug. You unplug the electrical connector, remove the hold down nut, and lift the coil off.