i just walked in from doing it. gouged up knuckles and all. the passenger side is pretty straight forward. unclip the part of the air intake that holds the filter and move it out of your way. press the release tabs on the wires that plug into the plastic part and unplug them. undo the bolts that hold the the plastic thing on (if i remember correct their on the bottom right of the plastic thing if looking at the motor from the side of the truck). the long plastic tubes will now pull right out. undo the plugs with a socket and extension.
the driver side is definitely a bastard. you do it the same way, only it will take a long time and gouge out a few of your knuckles. hope it goes smoother for you that it did for me.
You can change the spark plugs on the 1997 Toyota Tacoma yourself. Remove the ground wire and spark plug wire. Remove plug. Replace the plug with a plug made specially for your model car.
how do I change spark plugs on 2002 Toyota tacoma v4
When changing the spark plugs on a 2006 Toyota Tacoma make sure the vehicle is off. Use a spark plug socket and pull the spark plug wires. Remove the old spark plugs and properly space and install the new parts.
The 2006 Toyota Tacoma V-6 engine spark plugs can be removed with a 5/8 deep well socket. Turn the socket to the left to remove the spark plugs.
Sorry, but you are badly mistaken. There are six spark plugs on the V6 Toyota Tacoma.
6
Four
Screwed into the heads.
Screwed into the head.
they are attached to the ends of the spark plug wires
4 if it is a 4 cylinder and 6 if it is a V6.
Use Denso Iridium spark plugs.