Want this question answered?
The lens is only available as the whole fog lamp. You have to remove the bumper to replace it.
I have a 2000 Ranger, and on mine the lens is made of plastic. To remove it, I squeeze the lens just enough so that the tabs will snap out.
Remove 2 screws that hold lens on, remove lens, then you should be able to change bulbs without any problems
Remove the dome light lens, pull the old bulb out, and replace with new bulb; replace the lens.
Pop the trunk, behind where the brake lights are, there is probably a plastic/rubber cover with screws in it, remove it, and then there should be some screws holding the lens in place, remove those, pull the brake light lens from the outside of the car, twist the wires to undo them from the lens, and go from there.
Remove the two screws that hold the lens on, remove the lens and change the bulbs.
On 2000 Dakota Sport you lower the tailgate and there are 2 Phillips head screws that you remove and the whole tail light module comes out. I don't think you can replace a single lens, you have to pay for a whole new module.
You will need pliers to remove the wire strip that keeps the light in the socket, then remove the lens. Carefully remove the bulb making sure there is not power in the light then replaces the bulb and reattach the lens and wire.
Remove the two screws in the lens. You can remove the entire assembly once you do this.
The lens assembly is held in with two screws. Remove those and the lens will pop out.
To replace the dome light bulb first remove the lens. If you gently squeeze the sides of the lens it will come out. Remove the old bulb, put in the new bulb. The lens snaps back in place.
Not possible. You have to remove the whole light assembly.