0
How do you remove the air-pump assembly on a 2000 Ford Mustang?
Wiki User
∙ 15y ago
the air pump is inside the passanger front fender behind the headlight. the easiest way to get to it is to remove the front passanger wheel pull out the wheel well and its right there. there are two plugs only. unplug those first. there are also 3 bolts that connect the black frame of the air pump module to the frame or chassie of the car. then last there are two hoses that come off of the pump 1 has a funny looking type breather cap on it the other is connected to a plastic pipe that goes up into the engine compartment pull this one out from the hose out of the pipe that goes to the engine. good luck the old pump electric motor is probably corroded. im still working the kinks out even after replacing the old pump last week. i went from code p1413 to p1414 & p1413. like i said good luck.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you remove door panel to get to speakers on a 2000 mustang?
Remove the screw under the door latch
How do you replace the headlight assembly on a 2000 KIA Sportage?
Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.
Do you need to remove the fuel tank to replace the fuel pump in a 2000 Ford Mustang?
Yes
How do you remove the lens to a headlight on a 2000 Grand Jeep Cherokee?
Not possible. You have to remove the whole light assembly.
Will 1998 Mustang wheels fit the 2000 Mustang?
Yes, wheels from a 1998 Mustang will work on a 2000 Mustang.
How do you remove the rear view mirror on a 2000 mustang conv?
Remove speaker grill, remove screw holding speaker, screws to the mirror are behind speaker
How do you remove the headlamb assembly on a 2000 Chevy Malibu?
lift up hood, on top of headlight assembly there are 2 tabs to pull up, then pull assembly out...
How do you change a wheel bearing Volvo s80 2000?
to remove the spindle and four bolts hold the bearing assembly to the "A" frame. remove the wheel, remove the control arm, remove the lower "A" frame , and remove the CV axle. then you will have acess to the 4 bolts that hold the bearing assembly. you will have to buy the whole assembly.
How do you remove window cable from 2000 Jeep?
You will have to replace the complete window regulator assembly.
How do you remove the V6 engine from 2000 cirrus?
The engine and trans are removed as an assembly out of the bottom.
How do you remove rotors on a 2000 camaro v6?
remove wheel. remove brake caliper assembly(not the brake hose) and pull off the rotor.
How do you remove the plastic cover over the headlights on a 2000 Ford Mustang?
You don't remove it per se, it is a complete housing that needs to be replaced. If yours are cloudy/foggy, look into some of the headlight restoration kits. If you have about an hour and $20, you can clean them up yourself. They will look better, and more importantly, you will see better at night.
