answersLogoWhite

0

Using a flat blade screwdriver, loosen the large hose clamps, disconnect the sensor connector(s) and pull it off.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Replace air filter on a 2002 ford expedition?

Air Cleaner (Element) Removal & Installation1. Disconnect the negative battery cable. 2. Remove the outlet tube clamp from around the air cleaner element housing and remove the tube from the air cleaner housing. Position the tube out of the way. 3. Remove the air cleaner element from the air cleaner housing. 4. Installation is the reverse of removal.


How do you clean the egr valve in a 2003 Mazda protege?

Remove the intake tube and you'll see it under the throttle body. Its a pain to get to the two bolts holding it, you will have to feel your way around to get to the bolts. Unbolt it and remove it, when you remove it clean it with carb cleaner or brake cleaner and let it dry completely.


Where is my 2003 Chevy Malibu Mass Airflow Sensor at?

On the tube between the air cleaner and the throttle body


Where is the air duct tube located on 2003 trail blazer?

Between throttle body and air cleaner


Where is the throttle body in a 2001 Hyundai xg300?

The throttle body is located off of the air cleaner box. Just follow the big black tube from your air cleaner. Remove the top portion of your air cleaner box and the entire tube. It's at the end of that.


What is a test tube cleaner and how is it used?

A test tube cleaner is a tool used to scrub and clean test tubes, typically made of durable materials like nylon or stainless steel. It is used by inserting it into a test tube along with cleaning solution or water, and then rotating the cleaner to remove any residue or contaminants from the interior surface of the test tube.


Where is the 2003 Ford Escape thermostat housing?

its under the tube going to the air cleaner box its plastic and its in the rubber hoses


Do I have to cut the line to remove the orifice tube on my 2003 Dodge Ram?

You could, but you will have to buy a new line to get a new orifice tube.


How do you remove a crossover tube 2003 windstar?

"crossover tube"... (??)If this is referring to the coolant bypass hose/tube, we've got you covered with the "Related Question" below.If not, please elaborate on what/where/symptoms are related...


Where is the IAT sensor located on a 2003 Chrysler Town and Country 3.8?

The intake air temperature sensor is on the tube between the air cleaner and the throttle body.


Breather tube from air cleaner?

Follow 1/2 inch tube from air cleaner on right side of car behind headlight bucket.


Where is the transmission fluid located at on a 96 Cadillac deville?

It is under the intake tube from the air cleaner. You have to remove the air box to get to it. GM had a great idea with this placement .....