0
Disconnect the battery. Take the drive belt off of the alternator. Disconnect the wires from the alternators rear. Unbolt the alternator, remove, and install the new one. Reconnect the wires, belt, and battery to finish the installation.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How do you remove the back seat of your Buick park avenue?
unbolt it
Where is voltage regulator on 1989 Buick Park Avenue?
Inside the alternator.
How do you replace the alternator on a 1992 Buick Park Avenue?
Hey Joe==Take the serpentine belt off and then take the neg battery cable off then remove the wires from the alternator then take the bolts out and remove the alternator. GoodluckJoe
How do you remove a tape deck from a 1996 Buick Park Avenue?
== ==
How do you remove the Governor on a 1997 Buick park avenue?
You cannot remove what it does not have. Your Buick does not have a governor. Speed is controlled by the ECU.
Removing a water pump on a 1998 Buick park avenu?
how do you remove a water pump on a 1998 buick park avenue?
After replacing the alternator on a 1993 buick park avenue how to reset the batterie light?
how to reset the batterie light
What would cause the alternator light to come on and off. On a1989 Buick Park Avenue.?
Something can be taxing the work of the alternator, or the alternator can be weak and needs replaced.
When Did The Buick Park Avenue Start?
The Buick Park Avenue Started In 1991
How do you remove the thermostat housing bolts on a 1985 Buick Electra Park Avenue?
Two 1/2" or 13MM bolts hold it on. But, you may have to move the alternator, or it's bracket to reach them.
How do you replace PCV valve on 1995 Buick Park Avenue?
The PCV valve on a 1995 Buick Park Avenue is located on the top of the valve cover. Twist the valve and pull to remove and replace it.
How do you replace the water pump on a 1988 Buick Park Avenue?
Remove serpentine belt, alternator, and power steering pump. Remove 4 water pump pulley bolts. Remove water pump housing bolts. Remove water pump.
