you must remove all interior panels of the trunk area on the right side of the car. all of the bolts are accessed behind the panel just to the right of the removable panel to access the right rear tail light bulbs. this is an arduous task, but not to difficult with a 10 millimeter socket driver and some patience.
Yes
remove antanna
To change PVC valve on a 1993 Nissan 300zx, first remove the oil dip stick and remove the tension clip from the PVC valve hose. Then remove the hose and the old PVC valve. Replace with a new PVC valve.
what sensor?
As long as the engine is VG30DE.
I changed a power antenna on a 1993 Caprice Wagon. I took half of the bolts out whthat attach the inner fender on the right front wheel starting at the bottom left corner and working clockwise. I then loosened several others from the 12 oclock position. I was the able to pull the inner fender out enough to reach through the opening and remove the antenna cable & nut holding the antenna to the body.
remove the nut at the base of the antenna. Slide off the grommet. The antenna will drop os hold on the the antenna as you remove the nut and grommet. Once this is removed. You will see how to remove the antenna unit.
Remove the plastic cover from inside the wheel well to expose the antenna. Remove mounting bolt. To replace antenna purchase an antenna with an adapter. Cut old antenna wire at base and connect new antenna using the adapter.
You can replace your 2003 Toyota Echo antenna. Remove the antenna retaining nut. Remove the cable from the bottom of the antenna. Reverse the process to install the new antenna.
how do i remove an antenna to a 1998 chevy express 1500 van
For 300zx: may help http://www.carstereohelp.org/DoItYourselfRepair/NissanPwrAnt300zx.htm
To replace the antenna on a Ford Focus remove the antenna from the base using a screwdriver. Remove the lighting assembly hose with a small key. Remove the plug in wires and the plastic housing. Put the new antenna base in place than screw in the new antenna.