Want this question answered?
i need the code to unlock the radio on my Volvo 960 1996
if you have to ask please dont even try it get someone who knows cars to do the job
The lug nut torque for that 1993 Volvo 960 is 63 ft.lbs.
Open the box in consol in the bottom remove a little plate with screw driver and you will see the 2 screws
how much will it cost to replace or repair rod for 1996 volvo 960?
Remove the plastic cover on top of the camshaft cover (the cover reads VOLVO 24 VALVE. You will need a Torx 24 to remove the fasteners and a 10mm socket to remove the coils above the spark plugs.
It is under the car almost directly under the driver's seat on left hand drive models, front passenger seat on right hand drive models.
The Volvo 960 in the UK is a straight-six 3 litre model. If North American 960's are similar then yes, there is a fuel pump mounted above the fuel tank - it actually fits onto the fuel tank. There's also another fuel pump located beneath the car, just aft of the front passenger seat (driver side in the States ..) in a bracket along with the fuel filter. There's an eBay (UK) guide at http://reviews.eBay.co.UK/Volvo-960-Automatic_W0QQugidZ10000000003233806 There's also some photos on my website that may help you (www) glennsmart.btinternet.co.UK and choose 'Volvo 960' from the drop down menu.
I have 2 earlier 960's. The oxygen sensor - the lambda is situated on the catalytic converter, which is below the driver seat on a right hand drive car. It has a slight angle to it where it fits into the cat. To change it is quite straightforward. There are a couple of photos on my own website: wwww.glennsmart.btinternet.co.uk Just click on 'Volvo 960' in the drop down menu and then click on the button 'Go there!
I have 1993 Volvo 960 and the coolant senor is located on the back of the block ( next to fire wall) The access is very difficult because the are two water hoses and some electrical wires right next to it.
Yes, the transmissions are compatible. The S90 was the re-branding of the 960 until 1998 or 1999.
I would like to install a timing belt on my 93 960 volvo / how do I line up the cams with the crank shaft???