I just removed my backseat from a 1987 Mazda 323 so it may be the same.
Move the front seats up and position yourself on the back floorboard facing the back seat. Locate the two metal brackets just inside the bottom edge of the the seat on either side. These are what secure two metal hooks that are part of the seat itself. Press on the seat from the front at these two locations to unlatch the hooks and then simply raise the seat up. Voila!
how do remove the brake drum on a 1991 mazda 323
The Mazda 323 of that time from had a 1600cc engine but that isn't going to effect the issue of where to get a wiring diagram. Haynes makes a manual for the 1990-1994 Mazda 323. If you have a 1986-1989 Mazda 323, you will need to get a FSM (Factory Service Manual).
The wreckers perhaps.
replace headlight on mazda sp20
Try a 1988 323
With an uncle and a hammer.
The flasher unit on a Mazda 323 is located on the end of the flasher lever. Remove the lower steering column to bring the unit to view.
Next to the radiator on the drivers side, in front of the battery.
It is on the fender right beside the coolant reservoir.
Mazda made a 323 "GT" turbo 4 door sedan for at least 2 years, 1988 and 1989. It featured the 1.6 DOHC (B6T) engine that was also standard for the 323 GTX. It was rated at 132 bhp.
3 1/2 to 4 liters.engine oil.
The igniton timng is 6 degrees BTDC
No sorry they are completely different.
Mazda 323 familia valve timing set up
114x4 thats what i was told on my mazda 323 '84
The first Mazda Protege, also called the Mazda 323 and the Sixth Generation, was manufactured in 1989, and the car's production lasted for six years until 1994.
NO, but the entire wheel assembly will have to be removed.
1990 what the start of the BG body style for the Mazda 323. When it comes to the lights, 1986-87 and some 1988's are interchangable. Mid-way thru 1988 there was a slight change in the body. From that change thru 1989 the lights are interchangable. Then from 1990 thru 1994 there were the same. Otherwise, you cannot swap across those years.
The speaker size for a 1992 Mazda 323 would be 6-1/2.
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
i need carburetors Mazda 323 1.5L rebuilding Harold E. Lozano P. firstname.lastname@example.org
The recommended brand coolant for use in a Mazda 323 Astina is Genuine Mazda Long Life Coolant. This can be bought at any Mazda dealership.
Turn the AC or the Defroster off.