100-400 or so
100-300 US Dollars.
R10 reinforcement, at every 300mm
Be happy to help. First ensure your rifle is empty and safe. Open the bolt, pull it back half way. Put your finger BEHIND the trigger and push the trigger forward (this may be a bit hard) then you will be able to pull the bolt out. That's all there is to it. Hope this helps. Cheers Ron
Is the Scan R10 a good bmx bike for doing tricks on
Remove the firing pin from the rear and the locking bolt will side out the side of the bolt
Gun shop, gun show, want ad, for sale ad, estate sale
remove shifter boot/ 4 screws to floor board remove nut from cross bolt install nut on opposite side of cross bolt and tighten nut cross bolt is tapered, this will remove cross bolt
Try holding the trigger back when you remove the bolt
Open the bolt, pull it to the rear, hold the trigger back and remove the bolt. sales@countrygunsmith.net
First remove the screw opposite the bolt. Operate the bolt as if you were cocking the gun, pull the trigger and it will slide out.
Open the bolt, hold the trigger back, pull the bolt out