Try holding the trigger back when you remove the bolt
3 - Three
you can get that mount at mid way
Hi, depending on condition. should be around the $150.00 range.
Remove the stock and you will see what is keeping the bolt from sliding out.
Open the bolt, pull it to the rear, hold the trigger back and remove the bolt. sales@countrygunsmith.net
That will depend on your skill level, the type of ammunition used and the game being hunted.
. to remove the bolt on this model you must lower the tube assembly,there is a screw under the stock, remove stock first.
First remove the screw opposite the bolt. Operate the bolt as if you were cocking the gun, pull the trigger and it will slide out.
on the 22 model 121 to remove the bolt, open the bolt, pull the trigger and slide the bolt to the rear.
Remove the barreled receiver from the stock and then remove the screw from the left side of the receiver. The bolt will slide out.
The Stevens model 325C,bolt action rifle in 30-30Win.caliber was made from 1947-1950.A rifle of this model will bring between 135-225 dollars,for a example exhibiting between 60%-90% of its original finish,and a good bore.
Actuate the bolt to the rear and there is a tang in front of the trigger that hangs down..Press up on this tang and pull the bolt back and it will remove it from the action.