Want this question answered?
The 1999 Dodge Avenger signal flasher relay switch is located beneath the drivers side dashboard. The signal flasher relay switch will be between the gas pedal and the brake pedal.
Remove the tire and wheel. Remove the spring from the brake shoe assembly. The brake shoe will come off. Reverse the process to install the new brake shoes.
Dot 3
The red brake light on the dash means that the brake fluid is low or the parking brake is on.
remove the caliper slider bolts and the brake hose then put the new caliper on, dont forget to bleed the new caliper and top off brake fluid when finished
2008 Dodge Avenger turn signal and/or brake light bulb replacement: Purchase the correct replacement turn signal and/or brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal and/or brake light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
It is inside the shifter assembly.
Begin by removing the tire and wheel from your 1998 Avenger. Remove the brake spring and the brake caliper. The brake pads will come off. Reverse the process to install your new brake pads.
How do you remove the rear brake rotor on a 2005 Dodge Ram 2500?
check your fuses.
you have to remove the caliper to access the brake pads
See sources and related links below for 1993 Dodge Shadow tail light, brake light and turn signal light bulb part numbers.