Want this question answered?
Don't do it, it is there for a reason.
Witch black box
Ask him to get off, please.
A picture of the clutch assembly removal process for a 250 Polaris Trailblazer can be found in the repair manual. It details how to access, disassemble, and remove the assembly.
The best way to remove the rear axle on a Polaris Hawkeye is to spray it with PB blaster. After waiting several hours or a day, simply pull the axle outward.Ê
remove clutch cover. remove old belt. install new belt.
Remove the bolt from the crankshaft. You will need a puller to remove the clutch. I can tell you how to make one, Let me know.
take off the skid plate and there should onley be 3 bolts holding it in place and it slides right out and polaris had a recall on those
can some one please help iwant to remove astarter from polaris 425 quad many thanks Hi. If you still need help I recently removed my starter from a 2000 polaris xpedition 425. It's actually quite easy. First remove the seat, then you should be able to pop loose the side panels and remove them. Once you can get in there there should be two bolts holding it to the rest of the engine, and one holding on a positive wire, go ahead and remove those and it should slide out. Mine stuck a bit, but you just have to work with it.
You have to pull the front clutch off to get to the rest of the bolts...
Remove the cables from the starter. Remove the starter retaining bolts. The starter will come off. Reverse the process to install the new starter.
Disconnect the positive cable from the battery. Disconnect the cables from the starter. Remove the starter retaining bolts. Pull the starter out.