Depending on what panel your are talking about, but the panel around the radio just "pops" off. Well actually they both just pop off but you may need to assist them with a small flat-headed screw driver.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
open the driver side door. There is a panel on the dashboard that is really easy to remove when the door is open... ope panel, see fuses and on the panel is a diagram to locate which is which!
Here's a great how to video that will show you how to properly remove the door panel on your 2005 Chevy Malibu. A link has been included below.
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
Using a screwdriver, remove the screws that are in the door panel, be sure to remove the clips as well, and gently pull the panel away from the frame. Remove any wire connectors between the frame and the panel, and pull the panel off the rest of the way.
remove door panel to check it!!
the horns are located on the passenger side under headlight in the fender. remove the plastic panel to access them. you may have to remove wheel also.
Unless there is an access panel in the trunk you will have to remove the fuel tank. I would check with your Chevy dealer, as this may still be under warranty.
The power window fuses and relay should be on the passenger side dashboard facing the door. take the panel off and on the panel it should be labeled... more fuses on the drivers side ...
how do you take the dash board outon a 2006 chev Malibu
The radio in a Malibu Maxx can be removed by dismantling the dashboard panel. The radio will need to be disconnected from the wiring before it is removed from its mount.
Remove the screws in the door panel.