Turn it to the left and unscrew it the pull.
the trans fluid plug is a screw in plug near the oil dipstick. Remove that plug and it will have a dipstick made into it. That is the transmission fluid reservoir.
Let engine cool. Remove dipstick/fill plug. Remove oil filter. Remove drain plug (underside of bike).
Park it on the kick stand engine off, of course. Check the level by removing the dipstick and wiping it clean. Fully reinstall the dipstick and then remove it. The bottom mark is full cold. The top mark is full hot. Do not overfill.
Remove the socket head plug located next to the oil dipstick knob and observe the level on the dipstick attached to the plug. If necessary add transmission oil thru that same hole.
how to remove broken dipstick tube ford winstar
remove bolts and clip. Then remove oil dipstick tube.
You'll need to remove the alternator and also the oil dipstick. Remove the bolt that holds the dipstick on and when you move the dipstick out of the way the alternator will come out. Otherwise the alternator is too large.
Look under the hood, and locate the transmission dipstick. Grab the top, and pull the dipstick out of the dipstick tube.
the transmission dipstick tube is bolted (1bolt) to the left rear of the transmission bell housing. Remove bolt and pull up on the dipstick housing to remove it from the transmission fluid pan.
To read the oil dipstick in the 1997 Ford F150, remove the dipstick from the oil reservoir. Wipe the dipstick clean and then place it back into the reservoir. Then, remove the dipstick again and look for the height of the oil on the stick. It should be in the "Full" range.
battery removal of 2004 harley dyna
Just pull it out by the handle.