Just pull it out by the handle.
how to remove broken dipstick tube ford winstar
remove bolts and clip. Then remove oil dipstick tube.
You'll need to remove the alternator and also the oil dipstick. Remove the bolt that holds the dipstick on and when you move the dipstick out of the way the alternator will come out. Otherwise the alternator is too large.
Look under the hood, and locate the transmission dipstick. Grab the top, and pull the dipstick out of the dipstick tube.
the transmission dipstick tube is bolted (1bolt) to the left rear of the transmission bell housing. Remove bolt and pull up on the dipstick housing to remove it from the transmission fluid pan.
To read the oil dipstick in the 1997 Ford F150, remove the dipstick from the oil reservoir. Wipe the dipstick clean and then place it back into the reservoir. Then, remove the dipstick again and look for the height of the oil on the stick. It should be in the "Full" range.
You would probably have to follow the dipstick tube to where it meets the engine, remove the bracket bolt and either remove the tube or lift it up to push the dipstick up or out of the tube.
You'll have to remove dipstick tube first and then push broken dipstick out from the bottom side up. Before removal of the tube clean surroundings to avoid dirt from getting into engine.
Cut the dipstick tube with a tubing cutter below broken dipstick and remove Use rubber tubing and hose clamps to reattach tube pieces
Remove the oil fill cap which has a built-in dipstick. Wipe the dipstick with a clean rag. Stand the bike straight up in the riding position (not on the kickstand), replace the dipstick and remove it again. Check the level and color of the oil on the dipstick. * Note: When replacing and removing the dipstick, try not to shake the bike around as this will give a false reading.
Remove the transmission dipstick and add the fluid in the dipstick channel.
Turn it to the left and unscrew it the pull.