By the book, and probably the easiest way is to pull the pins from the hinges. There's a small retaining clip that has to be removed, then knock the pins out. It's a pain...especially the bottom side. Very little room to work. The other way is to remove the interior kick panes to access the bolt that can't be removed from the outside.
re word the question
It has a retainer on the inside of the door. Take the door panel off.
The door panel in a 1994 Chevrolet Cavalier Z24, can be removed by first removing the lens covers from any lights in the door. Then, remove the light sockets themselves with a screwdriver. Using a flat screwdriver, gently pop the clips on all sides of the door panel and remove it.
Have to remove the door, then remove pins and bushings
purchase Haynes manual.
it is located behind the coil packs
take it to safelite lol
You will need to remove the inside door panel of your 1993 Chevrolet Blazer. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
To remove the door panel on a cavalier there are four screws on the under side and the back of the bottem lip. Remove those screws then there are 2 screw in the door handle. Remove those. remove the triangle piece of plastic where the mirror controls are then give it a little tug and the door panel should pop loose then lift up and walk away with it. If you have crank windows then you have to remove the crank lever and if you have electric locks the you have a clip you have to un do that powers the switch.
http://www.autopartswarehouse.com/productsearch/chevrolet_cavalier_mirror~cipa~C7327090.html?apwcid=P1135867996W43b3f85c7ab9e&apwkwd=Chevrolet+Cavalier+Mirror+CIPA That is where you can get an idea of the price,,,, Just remove the door panel and the screws that hold the mirror where the dash meets the door , there should be three or four , then unclip the wires gthe control knob should slip out to the outside.
Open your doors, you may need to remove your fenders .Then find the nuts for the hinges, remove the nuts while supporting the door. Be careful of your door. Remove the hinges from the frame, replace, follow through in reverse.
check under the outside edge of the drivers seat.