Hyundai Elantra
Door Panels and Handles
Locks and Latches

How do you remove the door panel on a 1995 Hyundai Elantra?

171819

Top Answer
User Avatar
Wiki User
2008-12-12 18:47:22
2008-12-12 18:47:22

Well you unscrew the bolts on the sides and edges and some screws might be hidden under the what looks like a circle. The one on where you put you hand on to open the door.. there is no screw there... and once all the screws are out pull it off.. your gonna have to use some muscle but it'll come off.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The 1995 Hyundai Elantra EGR valve is located on the firewall in the engine compartment. The EGR valve will be on the passenger side of the firewall.

User Avatar

You can find a 1995 Hyundai wiring diagram at your local Hyundai dealership. Hyundai service manuals will also have the wiring diagram and can be found at your local library.

User Avatar

how do you remouve engine mounts on 1995 Hyundai sonata

User Avatar

The fuel pump relay allows the pump to be turned on and off. On a 1995 Hyundai Elantra the fuel pump relay is located under the dash. There is a plastic module that is connected to the top of the ECM, on which you will find the fuel pump relay.

User Avatar

right above the alternator.it links the alternator the the engine block.

User Avatar

Look under the vehicle follow fuel line from tank

User Avatar

How do I remove the left side door panel of a 1995 Gmc Sierra without breaking the door panel?

User Avatar

remove front door panel 1995 Nissan maxima

User Avatar

on the back part of your engine in the center.....good luck changing it.:) You can see it better from the bottom.

User Avatar

Get your brakes checked. It can be something simple, or it can mean impending doom.

User Avatar

1. Disconnect the negative battery terminal 2. If necessary for access remove the air cleaner assembly 3. Remove the clips and detach the hoses from the fuel filter the remove the filter bracket nuts and lift the assembly out of engine compartment

User Avatar

How can I take apart the dashboard of a 1995 gmc Yukon

User Avatar

To remove the door panel you will need to find and remove all screws. Once you have taken out the screws you will need to gently pull the panel away from the door.

User Avatar

First, use a screwdriver and remove the screws in the panel and remove the clips. Gently pull the panel off the door frame and remove any wire connections and pull the panel off the rest of the way.

User Avatar

Using a screw driver, remove the screws and the clips from the door panel. Gently pull the panel away from the frame, and remove any wire connectors. Then pull the panel the rest of the way off.

User Avatar

u can access it from the front portion of the right front wheel by removing the inner arch plastic coverings

User Avatar

Using a screwdriver, remove the screws and the clips in the door panel and pull the panel away from the frame. Remove any wire connections between the two, and the panel will come off the rest of the way.

User Avatar

remove back seat, remove screws bottom and top of panel, remove panel. remove 3 bolts and motor arm, window and regulator will pull out.

User Avatar

A 1995 Hyundai is a fuel injected engine, and it does not have a choke.

User Avatar

Using a screw driver, remove the screws and the clips in the door panel (some will be in the arm rest, too). Pull the panel gently, reach behind it and remove any wire connector carefully, then pull the panel off the rest of the way.

User Avatar

Under the glove box, there is a panel, I think you need a 7mm socket. Remove the panel and there it is.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.