remove all the obvious screws, and then start popping out towards you (there are clips holding panel in) you may need to replace clips once out, cause theyre plastic and one-way...available at most parts stores...also.. ...everyone should have a manual for their vehicle(parts store or dealer), and a local library should have professional shop manuals available in the REFERENCE section for free...make copies of the appropriate sections...read up and good luck :)
To change the front speakers, you will have to remove the door panels to expose the speakers. Once exposed, unhook them by disconnecting all the wires.
need help on taking my speakers out.
You need to take of the door panels!
You have to remove the door panels
pull the inside door panels off and then you can get to the speakers that are mounted on the inside of the door.
Remove speaker grill covers on dash to expose tweeters then remove door panels and you will se the rest of speakers
take the inside door panels off and then you can unbolt the speaker from the door.
Unscrew door handles in front first then just pull off door panels carefully unscrew speakers and replace with new.
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
To replace the front speakers in a Toyota Sienna the door panels must first be removed. With the door panels removed the speakers will be easily accessible and the mounting screws can be loosen. Unplug the speakers and remove them. Install the new speakers.
You will need to take off the panels covering the speakers, then you will unscrew the speaker and take it out, after that you will need to unplug the adapter from the back of the speaker and cut off the adapter at the end of the speaker wires, then just attach your little plugs to the end and plug it into the back of your new speakers. Screw everything back in and put your panels back up.-Shocker
Remove the door panels and unscrew the grills, then unscrew the speakers