Have you loosened the brake adjuster so the pads are retracted from the drum? To learn how to do this, get a copy of a service manual for your truck. A chilton manual from an auto parts store would be sufficient.
If the drum still won't come off, and you are prepared to replace them with new ones, take a 5 lb sledge hammer and break the drum.
THERE SHOULD BE A RUBBER PLUG ON THE INSIDE OF THE BACKING PLATE. FROM THERE YOU CAN LOOSEN OFF THE ADJUSTER. YOU MIGHT HAVE TO USE TWO SCREWDRIVERS, ONE TO HOLD THE ADJUSTING ARM OUT OF THE WAY WHILE TURNING ADJUSTER.
No they won't. They completely changed the Dakota bed in 1997
Yes, on all equipped engines on all 1993 Dakota models.
No, they are 2 different styles.
It may fit, but it will not shift as they have different governor types.
Dodge does not use inertia/reset switches.
They are on all sides.
Get it fixed
A 1993 dodge Dakota has a fuel tank of 22 gallons and gets an average of 15 mpg.
dodge Dakota 1993 looses power pulling trailer up hills, whats wrong?
What do the REQD light mean on my dashboard of my 1993 Dodge Dakota 3.9L Truck
Lower driver side of engine.
top of bellhousing
Dodge dealerDodge dealer
how much horespower does a 1992 dodge Dakota 3.9 liter with 2 k@N air filters have
When changing the spark plugs of a car, it is important to remember the correct gap size. For a 1993 Dodge Dakota the spark plug gap size is .035.
Yes it will as long as the ECU is from the same drive train (E.g. 4x4, 4x2 automatic, manual.)
you must remove belt and a/c comp. if you have it. $5 part 2 hour job.
Under hood on driverside inner fender.