Want this question answered?
In order to remover the handle from your Peugeot 206, you have to take the handle ring. Then slowly move to the bottom of the door where you will find two more screws, finally you need to pull the door so retairners come off along easily and are not damaged.
To get to the pump: Remove front driver-side wheel Remove Wheel arch trim, normally only 3-4 plastic retainers and the pump is visible towards the front of the cavity Hope this helps 80)
Second Use Building Material Inc�?? is good 7953 2nd Ave S, Seattle, WA�?? - (206) 763-6929�??
Brake it
To change the temperature sensor on a Peugeot 206, look at the underside of the passenger door mirror. There is a small black plastic bump sticking out of a hole in the mirror body. Remove the cover from the rear of the mirror and attach the new sensor.
take off all the wheels undo the sunroof then fill the fuel tank only 3/4 full then carefully remove the nearside front headlamp bulb this makes it easier
Remove the thermostat housing. where is, and how do i remove the housing
remove the 2 13mm bolts on the left side of the glove box hidden by a plastic cap which is connected to the frame then undo the torx screws , take door out then the glove compartment should just pop down and out
Between £25 and £70 for a door from a scrapyard or ebay and an hour or two of your time.
how to remove starter motor for Peugeot 206 1.4 hdi.
The Peugeot 206 is a subcompact car. One has to remove the full light to change indicator bulb. A spanner can be used to remove the light cluster. Break the spanner off, and rebuild.
remove the centre console and its under there, around the handbrake