You have to remove the panel which goes around the stereo and compartment. You will see four screws which are holding the holder with the stereo and compartment. Remove the screws and take out the holder. You might need to disconnect wire harness and the antenna before you will be able to pull the holder out. The stereo is sitting on 2(4) screws which keep it in the holder.
Where is the radio antenna located on a 2003 Mitsubishi eclipse
The mitsubishi eclipse has never had a bose stereo your 01 gs came with an infinity stereo, if your car does have one it is because it is aftermarket. To remove it you simply take the 2 screws at the bottom of the face plate that covers the heating and radio then remove the 2 or four depending how big your stereo is and pull it out.
The Mitsubishi Eclipse radio code is the code that makes your radio work. You need to put this code in any time you disconnect the battery.
There is a frame around the radio that can be remove with a screw driver. Once this is remove you will be able to see four screws that need to be removed.
This is a link you can go to and obtain instructions with illustrations: http://documents.victorytechnologies.com//documents/product/882.pdf
There are two Philips screws underneath down by the cubby hole then the whole piece comes off then four more screws in plain sight when this is removed pull radio out unhook wire harness' and antenna unscrew radio from metal housing and presto your done.
Behind the radio
6582
No. Worst case scenario is you will have to reprogram any aftermarket Radio/DVD/Stereo.
Remove your radio, get the serial number and call the dealership, they won't charge for the code they usually charge to remove the CD player to find the serial number.
Its under the radio its called the turn signal and the hazard module black box with 14 wire connector
how do i remove radio from 98 montero sport for #