0
With the serpentine belt removed you can hold the pulley with a strap wrench and then slip a open end wrench over the large nut behind the fan clutch and turn it counterclockwise to remove.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you remove the water pump in a 1998 Chevy S10?
Drain the water from your 1998 Chevrolet S 10 cooling system. Remove the water pump return hose. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
When do you need to change a water pump on a 2000 blazer?
s10 or full size ?
How do you replace water pump in Chevy s10 2000 2.2?
To give yourself some elbow room, remove the fan/clutch assembly along with the fan shroud. Note, the water pump is not behind the fan pulley as you would normally expect. Remove the accessory belt. Remove the water pump pulley. Drain off the radiator coolant into a clean container. Remove the water pump. Install in reverse order.
How do you change the water pump on a 2000 Chevy S10 truck?
Need to know which engine you have.
How do you replace the fuel pump for a 2000 Chevy s10 pick up?
You will need to remove the fuel tank to gain access to the fuel pump.
What are the torque specs for a 2000 Chevy S10 water pump?
33 ft lbs of torque
2000 S10 Chevy engine rebuild cost My Chevy s10 has a broken water pump which caused the engine to over heat and burn up the rings Motor need rebuild and water pump Whats the cost?
999.99
How do you remove the fan from the water pump on a 1999 Chevy S10 Nothing will budge it?
the fan has left hand tread.try turn it in a clockwise direction to remove it
Where is a fuel pump on a 2000 S10 pickup?
in the fuel tank
Witch way does the nut turn on a Chevy s10 water pump?
To loosen the nut on a Chevrolet s10 water pump, the nut must be turned to the left. To tighten the nut on a Chevy s10 water pump, the nut must be turned to the right.
Is a 2000 s-10 4.3litre water pump standard or reverse rotation?
The water pump would be a standard rotation. The serpentine belt moves clockwise on the model truck which would make it standard not reverse. With a serpentine belt system like the one in the 2000 S10 4.3, any pulley that is grooved turns clockwise. Any pulley that is smooth turns counterclockwise. The water pump pulley on that S10 is smooth and turns CCW.
2000 S10 Blazer will crank but will not start?
Probably the fuel pump is bad.
