0
You'll need a 10mm socket
1 DISCONNECT POWER/BATTERY SAFETY FIRST
2. remove plastic cover (flap) that goes over top of radiator.
3. remove 2, 10mm metal screws. these screws are for the shroud of the radiator.
4. there is 1 more 10mm screw....from underneath looking up....It's towards the bottom right side of the cooling fan shroud, hidden behind some electrical tubing. These are usually rusted.
5. Back up top.... you need to pry the radiator shroud (step 3) towards you, to get to the clip, holding the cooling fan shroud. The plastic clip is about 2" long.
6. When you get the clip off, with some finageling...work the shroud downward to remove
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you remove the cooling fan shroud from a 2000 Chevy cavalier?
The 2000 Chevy Cavalier cooling fan shroud is held in place with 10 retaining bolts. Remove the retaining bolts and the cooling fan shroud will come off.
How do you replace the water pump on a 1993 Chevy Cavalier?
Drain the radiator. Remove the fan and fan shroud if needed. Remove the pump belt. Unbolt the pump and remove it. Install the new pump. Reinstall the belt, fan and fan shroud. Refill the system with new coolant.
How do you replace the water pump on a 1992 Chevy Cavalier?
Drain the radiator. Remove the pump belt. Remove the fan and shroud if needed. Unbolt the pump and remove it . Bolt on the new pump. Reinstall the fan and shroud, the belt, then refill the radiator.
How do you replace the water pump on a 2002 Chevy Cavalier?
Drain the radiator. Remove the pump belt. Remove the fan and shroud if needed. unbolt the pump and replace it with the new one. Reinstall the fan, shroud, and belt. Fill the radiator with coolant.
How do you remove fan shroud on 2004 gmc envoy?
How do you remove the fan shroud on a 2004 get envoy
How do you replace the water pump on a 1988 Chevy Cavalier?
Drain the radiator on the 1988 Cavalier. Take of the water pump belt. If the fan and shroud are in the way then remove them. unbolt and remove the pump. Bolt up the new pump and put the belt back on. Put the shroud and fan on if they were removed. Fill the radiator back up.
How do you change the cooling fan motor 2002 Chevy cavalier?
First unplug the fan. Second remove the bolts on the out side of the plastic fan shroud, the motor and fan blade are connected to this then remove the whole unit out of the car. Then remove the bolt that's connecting the fan blade to the motor, these bolts usually are reverse threads to you have turn the bolt to the right to remove it. i know it sounds crazy. Then the motor should come free of the plastic shroud and the blade. finally reverse the steps.
Do you have to remove fan shroud to access thermostat housing on 1997 Ford Ranger?
do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger
How do you remove fan blade on 2001 dodge ram 1500?
# Disconnect negative battery cable # Remove the serpentine drivebelt # Remove the coolant reservoir from the fan shroud and set it aside without draing the tank or disconnecting the hose # Disconnect the electrical connectors at the windshield washer reservoir and remove the reservoir from the fan shroud # Remove the fan shroud mounting bolts # A special 36mm fan wrench is required to remove the cooling fan can get at most auto parts stores
1999 ford f150 removing fan shroud?
To remove the fan shroud from the 1999 Ford F150 you need a user manual to guide you.
How do you remove fan shroud on 2006 ford f350 diesel powerstroke?
remove the top fin then remove the two 8mm bolts then remove the support brackets on radiator lean it forward pull strait up on the shroud the remove the fan with the pneumatic tool finally remove the 15mm bolts holding the shroud to the engine
How do you replace a fan motor in a 1996 Saturn SL1?
Remove the two bolts at the top of the shroud, then remove shroud, fan, and motor as an assembly. Remove the One True Nut (reverse [LH] thread) that holds the fan blade to the motor. Remove the plastic-screws holding the motor to the shroud. Pull the blade off the motor. Use a hammer to disengage the motor from the shroud. Installation is reverse.
