Want this question answered?
remove front fan shroud and upper radiator supports loosen fan which is right hand thread normal. you can remove the four 15mm bolts that hold the back shroud on two top and two bottom and pull the fan and rear shroud out at same time remove the 10mm bolts that hold the fan to the fan clutch and reinstall.
If you're just changing the fan, no. If you're changing the entire heatsink, yes.
Remove the fan itself then remove the clutch from the fan
The wench will be used to remove the clutch fan nut. Remove the nuts holding the fan then remove the fan blade.
remove the fan clutch and fan first
located and connected to the fan,drain radiator,remove both ,radiator hoses, remove fan belt,remove fan shroud,remove radiator.remove fan,remove water pump.
How do you remove the fan shroud on a 2004 get envoy
Remove the wiring harness or the fan motor belt, depending on the year of your Chevy Cavalier. Remove the fan motor retaining bolts. The fan motor will come off.
To remove the fan clutch on a Chevy Tahoe, the upper fan shroud must first be removed. Once removed, a tool is needed to hold the clutch in place to allow for the fan to be removed. The nuts must be unscrewed on the fan in a counterclockwise rotation. Remove the nuts on all side and the fan clutch will remove.
There are 4, 10mm bolts across the top at the front. Remove these. There are 2, 10mm bolts on either side about half way down. Remove those. Left the AC lines up, out of the way and then just pull the top half of the fan shroud out. If you are changing the water pump, radiator, condenser, etc. there should be no need to remove the bottom half of the shroud.
Remove the wiring harness to the heater blower fan. Remove the retaining bolts. Remove the fan from the blower. Reverse the process to install the new heater blower fan.
how do you remove a fan blade from a 1998 ford explorer