Remove dust cap in the center of front hub
Remove the nut (2) and the washer (3) from the hub.
The four bolts on the back side of the hub do need to come out. Usually a good 15mm socket on a breaker bar will break them loose with no problem. Continue applying heat and penetrating oil. They will eventually break loose. It usually works better to use a breaker bar instead of air tools.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off
Remove the tire and wheel from your 1999 Chevrolet Suburban. Remove the brake pads and break assembly. Tap on the rotor with a hammer or mallet. When the rotor is loose it will slide off.
A 3/8" Allen wrench will remove that bolt on the front caliper.
= What tool to remove a front brake pads on a 2007? =
FRONT OR REAR?
To change the brake pads on a 1991 Chevrolet Caprice, you will need some tools. You're going to need a c-clamp, a hex key or Allen wrench to remove the calipers, and a wrench to bleed the lines.
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
See below article-
you have to remove the caliper to access the brake pads
Put emergancy brake on, then jack up the front enfd remove tires, use a 3/8 Allen tool to remove the caliper mounting bolts. Then remove the brake caliper, and remove pads from caliper. Next push piston caliper into the caliper, reinstall the caliper. Re install the front wheels, lower the vehicle, pump the brakes until they are hard once again, and your ready to drive again.
The answer and dimensions are stamped in the stock brake rotor of your vehicle.