0
1. Remover bumper turn signals.
2. Remove the corner makers. (they are adhered by 1 screw)
3. Remove the bumper corner brackets. They have 2 screws on each side.
4. Unscrew the 2 screws for the sliders/clips located on each side in front of the front tires.
5. Remove the 4 bolts holding the bumper on. Put something under it to help hold it so it doesn't drop. The bolts are located inside where the bumper lights go. There should be 2 12mm bolts on each side.
6. Now under the lip part of the bumper there should be 6 10mm bolts holding the dust cover on. Remove them and slowly pull the bumper off. You will need to un-clip the sides of the bumper.
What else can I help you with?
How do you remove the front bumper on a 1991 Acura Integra?
The front bumper on a 1991 Acura Integra is held on by several mounting screws. Remove all the screws and gently pull the bumper off the remaining mounting clips.
How do you remove a 94 Acura Integra front rotor?
See http://www.ehow.com/how_4506404_replace-rotor-acura-integra.html
Removal of front lug studs on a 94 Acura Integra?
Lug studs on a 1994 Acura Integra is pressed into the hub. To remove the lug studs safely raise and prop the car. Remove the wheel, brake components, and suspension parts from the hub. Press out the old studs.
Does a 1994 acura integra have rear abs?
No, it does not have ABS front or rear.
Where is the horn on a 1990 Acura Integra?
Try behind the grill but in front of the rad
Is an Acura Integra a rear wheel drive car?
front wheel drive
Would a 1998-01 Acura Integra front bumper fit on a 1997 Acura Integra?
Yes you just need to change the headlights and bumper lights along with the bumper
How do you remove bumber from Porsche 944?
Front or rear bumper? if its the front, all the lamps have to come out then remove the bolts from underneath.
Will acura integer gsr front spindle fit on 96 Honda Civic?
Will acura integra gsr front spindles fit on 95 Honda civic
Where is the transmission drain bolt on a 1994 Acura Integra?
behind front passenger tire
1992 Acura Integra front wheel bearing replacement?
Remove the tire and wheel. Remove the and to the axle. Remove the wheel bearing seal, with a seal puller. Remove the wheel bearing. Reverse the process to install the new wheel bearing.
Where is the water pump located on a 94 Acura Integra?
The water pump on a 94 Acura Integra is located on the front of the engine. It uses the power of the engine to circulate hot water from the engine to the radiator to cool it.
