No, it does not have ABS front or rear.
Yes that year integra is equiped with ABS
Yes that year integra is equiped with ABS
The 1997 Acura 3.0 CL has 4 wheel ABS. The rear ABS connectors are on the backside of the right rear control arm. The plugins are an orange color.
how to replace front abs speed sensor
In a 1992 Acura Integra, the ABS fuse is located in the under-hood fuse box. This fuse box is typically situated near the battery on the driver's side of the engine compartment. To locate the specific ABS fuse, refer to the diagram on the fuse box cover, which indicates the position and amperage of each fuse. If you're experiencing issues with the ABS, checking this fuse is a good first step.
Make sure it isn't the tire causing the noise first- and then- You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
Factory ABS has certain time to be serviceable. Once it's past due, when the abs lit comes up, it needs to be brought to servicing department to check for integrity. The reason for ABS light on is the ABS system is bad. The most common issue of Honda/Acura ABS is the Nitrogen tank lost the pressure. The solution is to replace the whole unit (Not computer control).
The rear abs sensor is on the top centre of the differential. There is a small bolt that holds it in.
Front disc, rear drum. with rear abs
It's the ABS sensor and should not be removed/bypassed.
It is on top of the rear axle
Rear only system, top of rear axle. Four wheel ABS system, top of rear axle, and at each front wheel bearing.