Want this question answered?
Its under the right front fender, behind the bumper(passenger side)
Does anyone know how to remove the chrome part of the front bumper on a Ford Ranger XLT
remove front bumper ford s-max
With your hands. Use your hands to help read Letters to Leigh by Demonmocker
there are two horns behind the front bumper below the head lights right and left on the front of the metal inter fender.
The 1995 Ford Taurus front bumper is held in place by four retaining bolts and six retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
Remove rear bumper on 99 ford tarrus
The stock speakers in a Festiva are 4 inch all around
To install Ford Festiva front wheel bearing, the engine must be stopped and the car taken to a flat surface. The jack is usually used to lift the vehicle.
I have a 93 sable, but it should be the same. There are two mounting areas on each side of the bumper with 3 bolts in each of them. You will have to access them from underneath the car. There are also two bolts which attach the bumper on each side of the car. remove the front bolts first, then remove the ones on the side. then you and a helper grab each side of the bumper and slide it out towards the front of the car. once you remove the bumper, you will see two slotted areas on the sides of the bumper. you need to re-align those with a round metal part (you'll see it once you remove the bumper), when you re-install the bumper. Steve phx AZ
http://ww2.justanswer.com/uploads/cheeko12/2008-08-18_195927_eb1.pdf
Reverse backwards and hit a boulder.. that thing will rip right off!